Hexcorder Pro CIPS/DCVG/ACVG/GIS Surveys

Features

10 different survey modes including Close Interval (CIPS), multiple DCVG channels, multiple impedance
Work with interruption cycles as fast as 1 second
User-customizable alarms for change in potential, DCVG indication & broken trailing wire can be enabled to help ensure data integrity
Records chainage, date, time, altitude and GPS location data with each reading
Integrate with all Bluetooth-enabled Radio Detection and Vivax Metrotech pipe locators to store depth of cover and signal strength data with CIPS & DCVG readings
Active AC filter to remove the effect of induced AC up to 100V
The run time of Hexcorder Pro is 24 hours, the tablet is 11 hours under field conditions, optional extra batteries are available for the tablet
Rugged, sealed, quick-connect push-pull connectors
Reads and stores waveforms
Comments can be easily entered into the data stream
User-programmable GPS offset to work in local time
App supports multiple languages
Designed to satisfy IP65 and EN61010 standards
Comprehensive 2-year warranty

Description

Can perform four different types of survey at the same time, CIPS,
DCVG, ACVG and GIS mapping
All data obtained at the same place & time under the same field conditions
Easily correlate cathodic protection data with coating integrity data to better prioritize remediation
Stored waveforms allow the user to capture electrical interference
GPS location data can be imported into mapping software
Available integration with Bluetooth-enabled pipe locators allows storage of depth of cover and signal strength data
PODS-compatible data stored as a .csv text file
No special software required
Easy to open and graph in any standard spreadsheet or import into your database program
Software upgradeable by customer
Optional sub-meter GPS with <10cm global precision available
Optional custom-tailored on-site survey training is available
Comprehensive 2-year warranty!

Hexcorder Pro assembly with integrated tablet
Wire dispenser with one spool of survey wire
Choice of: Hip pack – short surveys, urban areas 2 km (1.25 mile) survey wire OR Back pack – long, across country surveys 16 km (10 mile) survey wire
2 x half cell extension poles
2 x Cu/CuSO4 reference electrodes
Ergonomic four point shoulder harness
Survey pole and wire dispenser cables
WAAS enabled GPS antenna
Universal AC chargers for Hexcorder Pro and tablet
USB cable
Rugged carrying case
Operation manual

CIPS Range: +/- 5 V DC (opt +/- 10 V DC), resolution 0.1 mV DC
DCVG Range: +/- 500mV DC, resolution 0.1 mV DC
ACVG Range: 800mVp-p AC, resolution 1 mV AC
Memory Capacity: Supplied with 8 GB or larger micro SD card
CIPS Impedance: 25 M Ohm or 250 M Ohm
Gradient Impedance: 15 M Ohm
AC Rejection: -90 dB at 60 Hz, <3mV DC error at 100 V AC RMS superimposed
Case: ABS plastic, designed for IP65
Instrument Size: Hexcorder Pro with tablet assembly 30 x 25 x 10 cm @ 2.7 Kg • Connectors: IP67 rated, push-pull
Battery: Lithium Ion, 3.7V 33Whr = approx. 24-hours run time
Communications: USB 2.0, 2 x Bluetooth 2.1
GPS: Fully integrated WAAS GPS antenna
Shipping Dims: Hip pack system as 1 piece 10 x 10 x 120 cm @ 2.8 Kg + 1 piece 53 x 23 x 45 cm @ 9.8 Kg Backpack system as 1 piece 108 x 45 x 38 cm @ 24 Kg

Tablet Specification**

Ratings: Ruggedized, MIL-STD-810G and IP65
Processor: Qualcomm Snapdragon 660 octa-core 2.2 GHz
Operating System: Android 8 Oreo (or higher)
Memory: 4 GB RAM, 64 GB SSD
Display: 10.1” WUXGA (1920 x 1200), 500 nits or higher
Primary Battery: Lithium Ion, 98 Whr, hot swappable = approx. 11 hours run time under normal operating conditions
Communications: Wireless LAN 802.11ac, Bluetooth 5.0
Ports: DC power, 2 x USB 2.0, USB-C, Micro SDXC, RJ-45 ethernet, audio
Camera: 13 MP rear with flash, 5 MP front